There are a variety of factors that will determine which router is best for you. These include distance, interference, transfer speed, and security. Another factor to consider is the amount of signal interference. If you have multiple devices that operate on the 2. 4 GHz band, such as microwaves and cordless phones, these can interfere with the Wi-Fi signal. Newer routers can operate on the 5 GHz band, which is much less crowded and thus less prone to interference. The drawback is that 5 GHz signals do not travel as far as 2.
Transfer speed is a feature to consider. Newer routers claim to be able to transfer data up to 450 Mbps. While this may be helpful when moving data between two computers over a network, it will not increase your general Internet speed, as this is set by your ISP. There are three main router speeds available: 802.
Did not find what they wanted? Try here
Finally, make sure that the router you are purchasing has the latest form of wireless encryption, WPA2. This is pretty much standard in all new routers, but is something to consider if purchasing an older, second-hand router. WEP key can be cracked in just a few minutes. Connect the router to your modem. Once you’ve purchased your router, you will need to connect it to your modem. Connect this port to the modem using a standard Ethernet cable.
Make sure that the router is properly powered and turned on. Connect a computer via Ethernet cable. This step is not always necessary, but can be very useful if you want to set up the wireless router before connecting any wireless devices to it. Connecting a computer through a physical cable will allow you to tinker with the wireless settings without losing your connection to the router. Not every router comes with software to install, but if yours did, then install it on a computer that is connected to the router via an Ethernet cable.
Using the bundled software makes setting up a router much more convenient than going in to the configuration menus. Using the software, designate the name of your wireless network, and the type of security that you want to use. Most router software will automatically detect your internet settings. This is the information that the router needs to translate your internet connection and transfer it to all of your wirelessly connected devices. If your router did not come with any installation software, you will need to connect to the router’s configuration page through your web browser.
Open your browser of choice and enter the web address for the router. Consult the documentation that came with the router to find the exact address. This includes the IP address and DNS information from your internet service provider. Most routers will fill this section in automatically.