Reprogram roku remote

Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Here is how to Program a COX Remote Control. Your Cox Universal Remote Control is already programmed to operate your cable converter, reprogram roku remote RCA TV, an RCA VCR and a Pioneer audio receiver. Press and hold SETUP until the selected mode key flashes twice, then release SETUP.

Did not find what they wanted? Try here

ENTER the four digit code for your device found in the sidebar to the right. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the code is invalid. Repeat steps 2 through 3 and try entering the same code again. Aim the remote control at the device and press POWER once. If it does not, repeat steps 2-3, trying each code for your brand until you find one that works.

If it still does not work, try searching for the code. Repeat steps 1-4 for each device you want the remote control to control. For future reference, write down each working device code. Some of our programs are in Spanish, namely AMC, and some of the programs have a person describing what is going on.